The 330mv AC series of split core current sensors are ideal for installation on existing electrical wiring by snapping around the conductor without requiring and rewiring or interruption of the existing power cabling. UL listed product.
The current flowing through the core of this CT produces an output signal from 0 to 330mv ac, proportional to the current. The signal is a low voltage mv ac signal which needs signal conditioning before going into the typical controller.
The 330mvac signal is compatible with our T3-6CT and the Wattnode power meter on this site.
Primary Current: models from 1A up to 1000A available
Full scale output: 330mVac, compatible with industry standard power meters
Current Ratio: 3000:1
Insulation Voltage: 600Vac
Maximum Primary Voltage: 5000VAC (Insulated Conductor)
Operating Temperature: -15C to 60C
Frequency Range: 50-400Hz
Leads: 1m / ~ 3 feet, UL 1015, 2 conductor 0.34 mm2(22AWG)
UL and CE recognized, Rohs compliant
Output and leads can be customized
Secure locking hinge provides repeatable readings
Small size, low cost