D-C3T Hall Effect Current Sensor
D-C3T series dismountable hall effect current sensor is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC currents.
Specifications
Type | D-C3T- 400A | D-C3T- 600A | D-C3T- 800A | D-C3T- 1000A | D-C3T- 2000A | 单位 Unit |
额定输入电流(Ipn DC) Rated current(Ipn DC) | 400 | 600 | 800 | 1000 | 2000 | A |
测量电流范围(Ip DC) Measure range(Ip DC) | 0—800 | 0—1200 | 0—1600 | 0—2000 | 0—3000 | A |
额定输出电压（DC） Rated output | @Ip=±Ipn DC 4 | V | ||||
电源电压 Supply voltage | +12V，+15V，+24V | V | ||||
功耗电流 Power Consumption | <25 | mA | ||||
失调电压 Offset voltage | @Ip=0 ±20 | mV | ||||
磁失调电压 Magnetic offset | @Ip=±Ipn-0 ±20 | mV | ||||
失调电压温漂 Offset drift | @ -40～+85℃ ≤±1 | mV/℃ | ||||
输出电压温漂 Output drift | @ -40～+85℃ ≤±1 | mV/℃ | ||||
线性度 Linearity | @Ip=0-±Ipn ≤1 | %FS | ||||
响应时间 Response time | @50A/μS, 10%-90% ≤7 | μs | ||||
绝缘电压 Galvanic isolation | @ 50HZ,AC,1min 5 | KV | ||||