D-C2T Hall Effect Current Sensor
D-C2T series dismountable hall effect current sensor is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC currents.
Specifications
Type | D-C2T- 100A | D-C2T- 200A | D-C2T- 300A | D-C2T- 400A | D-C2T- 500A | 单位 Unit |
额定输入电流(Ipn DC) Rated current(Ipn DC) | 100 | 200 | 300 | 400 | 500 | A |
测量电流范围(Ip DC) Measure range(Ip DC) | 0—150 | 0—300 | 0—450 | 0—600 | 0—750 | A |
额定输出电压（DC） Rated output | @Ip=±Ipn DC 4 or 5 | V | ||||
电源电压 Supply voltage | +12V，+15V，+24V | V | ||||
功耗电流 Power Consumption | <25 | mA | ||||
失调电压 Offset voltage | @Ip=0 ±20 | mV | ||||
磁失调电压 Magnetic offset | @Ip=±Ipn-0 ±20 | mV | ||||
失调电压温漂 Offset drift | @ -40～+85℃ ≤±1 | mV/℃ | ||||
输出电压温漂 Output drift | @ -40～+85℃ ≤±1 | mV/℃ | ||||
线性度 Linearity | @Ip=0-±Ipn ≤1 | %FS | ||||
响应时间 Response time | @50A/μS, 10%-90% ≤7 | μs | ||||
绝缘电压 Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV | ||||
model | size（mm） | ||||||||
D-C2T | A | B | C | D | E | F | G | H | I |
20 | 42 | 40 | 61 | 48 | 60 | 7.5 | 5 | 16 | |