 |
SCT-T16
S3
85043110
The 100A/100mv split core current transformers are designed for fast and easy installation. The split core deign permits non-contact current measurements through magnetic field induction without requiring that the primary wire be taken off line and disconnected for CT installation. This method permits a safer easy and portable current measurement. An internal precision burden resistor across the secondary winding of the CT provides a safe low voltage output and permits safe opening of the secondary circuit
Split core
Safe operation
Mini in size
Very easy to mounting
Wide inner window
Wide range of size for all existing installation Primary current from 5A to 600A
Electrical Parameter
Frequency: 50-60Hz
Rated Input: 10A, 50A, 100A, 250A, 300A
Rated Output: 100mV / 100mV/ 100mA/ Customized
Accuracy: ≤ 1% at 20% to 120% of rated current
Insulation Voltage: 600V
Dielectric strength: 2.5KV/1mA/1min
Dielectric strength: DC500V/100MΩ min
Phase angle: Less than 2 degrees at 50% of rated current
Mechanical Parameter
Case: PA /UL94-V0
Bobbin: PBT
Core: Permalloy
Internal structure: Epoxy
Construction: Tie
Operating Temp: -25℃~+75℃
Operating Humidity: ≤85%
Output Connection: UL1015 20AWG Wire(twinsted wire) 2m
The 100A/100mv split core current transformers are designed for fast and easy installation. The split core deign permits non-contact current measurements through magnetic field induction without requiring that the primary wire be taken off line and disconnected for CT installation. This method permits a safer easy and portable current measurement. An internal precision burden resistor across the secondary winding of the CT provides a safe low voltage output and permits safe opening of the secondary circuit
Split core
Safe operation
Mini in size
Very easy to mounting
Wide inner window
Wide range of size for all existing installation Primary current from 5A to 600A
Electrical Parameter
Frequency: 50-60Hz
Rated Input: 10A, 50A, 100A, 250A, 300A
Rated Output: 100mV / 100mV/ 100mA/ Customized
Accuracy: ≤ 1% at 20% to 120% of rated current
Insulation Voltage: 600V
Dielectric strength: 2.5KV/1mA/1min
Dielectric strength: DC500V/100MΩ min
Phase angle: Less than 2 degrees at 50% of rated current
Mechanical Parameter
Case: PA /UL94-V0
Bobbin: PBT
Core: Permalloy
Internal structure: Epoxy
Construction: Tie
Operating Temp: -25℃~+75℃
Operating Humidity: ≤85%
Output Connection: UL1015 20AWG Wire(twinsted wire) 2m
